SPLB32A

The SUNPLUS SPLB32A, an 8-bit CMOS microprocessor, contains 1216 bytes working RAM, 512K bytes ROM, 8 I/Os, interrupt/wakeup controller, UART for serial communication and Serial SRAM interface for memory expansion, and automatic display controller/driver for LCD. It also features one PWM/DAC driver with two audio channels to produce attractive sound effects easily. Its large ROM area can be used to store both program and audio data. The built-in UART speeds up data transmission between two devices. Furthermore, a SLEEP (power-down) function is also built in to extend power life. The SPLB32A is designed with SUNPLUS state-of-the-art technology to fulfill LCD application needs, especially for hand-held products.

FEATURES

• Built in 8-bit processor
  • 1216 bytes SRAM
  • 512K bytes ROM
  • Max. operating speed: 4.0 MHz @ 2.4V - 3.6V / 5.0 MHz @ 3.6V - 5.5V
  • Programmable CPU clock: /1, /2, /4, /8, /16, /32, /64 of ROSC Frequency.
  • 6 wake-up sources
  • 7 interrupt sources
• Universal Asynchronous Receiver and Transmitter (UART)
• Serial SRAM interface
• Key scan function
  • SEG[15:0] can be used to send key scan output
• Programmable LCD driver
  • 74 segments, 16 commons, maximum 1184 dots or 64 segments, 32 commons, maximum 2048 dots
  • 1/5, 1/6 bias; 1/16, 1/32 duty capability
  • 296 bytes dedicated LCD RAM
  • Built-in voltage regulator to generate VLCD for LCD driver
  • 32-level contrast control (2.45V - 5.75V, in 1/5 bias)
  • 32-level contrast control (2.95V - 6.85V, in 1/6 bias)
• Power saving SLEEP mode
• Low Voltage Detector
  • 8-level 2.9V - 2.2V/4.35V - 3.3V detection
  • 2.2V Low voltage reset
• Low power consumption:
  • 600μA typical @ 3.0V, FCPU = 1.0MHz, FOSC = 4.0MHz
  • 25μA typical halt current @ 3.0V
  • <1μA typical standby current @ 3.0V

• Peripherals
  • Max. 28 I/O pins (PA[7:0], PB[5:0], PC[7:0], PD[5:0])
  • Dedicated I/Os: PA[0:5]
  • Shared pin I/Os:
    • PA[6:7] / SEG[63:62]
    • PC[0:1] / SSRAM SCK, SDA/SEG[61:60]
    • PC[3:2] / UART Tx/Rx
    • PC[4:7] / SEG[73:70] / COM[25:22]
    • PB[0:5] / SEG[69:64] / COM[21:16]
    • PD[0:5] / COM[31:26]
  • 32.768KHz oscillator circuit for RTC
  • RC-oscillator (only one resistor is needed)
  • Two 16-bit reloadable timer/counters
  • 8-bit DAC resolution, 2-channel PWM/DAC audio outputs
  • Watchdog Timer for reliable operation
• Wide operating voltage range:
  • 2.4V - 3.6V
  • 3.6V - 5.5V