ST8108: Unterschied zwischen den Versionen
Erscheinungsbild
Berger (Diskussion | Beiträge) Änderung 39702 von Berger (Diskussion) rückgängig gemacht. Markierung: Rückgängigmachung |
Berger (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
Zeile 1: | Zeile 1: | ||
'''SGS-Thomson Microelectronics, March 1990''' | '''8K ROM HCMOS MICROCONTROLLER'''<br> | ||
<small>'''SGS-Thomson Microelectronics, March 1990'''</small> | |||
The ST8108 is a complete HCMOS microcontroller unit (MCU). The device includes an on-chip oscillator, CPU, ROM, RAM, I/O, two serial interface systems (SCI, SPI) and one TIMER. The fully static design allows frequency operation down to DC, reducing power consumption when needed. | The ST8108 is a complete HCMOS microcontroller unit (MCU). The device includes an on-chip oscillator, CPU, ROM, RAM, I/O, two serial interface systems (SCI, SPI) and one TIMER. The fully static design allows frequency operation down to DC, reducing power consumption when needed. | ||
Zeile 30: | Zeile 31: | ||
*7 main addresssing modes (Immediate, Direct, Extended, Relative, Indexed, Indirect and Bit). | *7 main addresssing modes (Immediate, Direct, Extended, Relative, Indexed, Indirect and Bit). | ||
*Development support on real time emulator, EPROM version and PC/DOS sofware (Cross Assembler, Debugger). | *Development support on real time emulator, EPROM version and PC/DOS sofware (Cross Assembler, Debugger). | ||
<br> | |||
'''Photos:''' | '''Photos:''' |
Aktuelle Version vom 29. Januar 2024, 21:05 Uhr
8K ROM HCMOS MICROCONTROLLER
SGS-Thomson Microelectronics, March 1990
The ST8108 is a complete HCMOS microcontroller unit (MCU). The device includes an on-chip oscillator, CPU, ROM, RAM, I/O, two serial interface systems (SCI, SPI) and one TIMER. The fully static design allows frequency operation down to DC, reducing power consumption when needed.
Hardware:
- HCMOS Technology.
- 8 Bit Core & Architecture.
- Power Saving Wait, Halt and RAM retention modes.
- 7744 Bytes of user ROM.
- 176 Bytes of RAM.
- 24 Bi-Directional I/O lines.
- 16 Bit free running counter timer featuring, one input capture system and one output compare system.
- Serial Peripherical Interface (Synchronous).
- Serial Communication Interface (Asynchronous).
- External, Timer, SCI and SPI interrupts.
- Master reset and Power on reset.
- Single 3 to 6 Volts supply.
- 2 Volts RAM retention mode.
- User Mask options:
- RC or XTAL/Ceramic oscillator option.
- Interrupt trigger: edge or level & edge.
- Internal clock for TIMER, SCI and SPI.
- 40 pin DIP package.
- 44 Lead PLCC.
Software:
- 8 Bit data manipulation.
- 74 basic instructions.
- 8 by 8 unsigned multiply instructions.
- 7 main addresssing modes (Immediate, Direct, Extended, Relative, Indexed, Indirect and Bit).
- Development support on real time emulator, EPROM version and PC/DOS sofware (Cross Assembler, Debugger).
Photos: